Updating ps3 from storage media
If your PS3 system software version is 4.55 (or later), you do not need to perform this update.
To check the version of your system software, go to Settings (Settings) You can update your system software by any of the following methods: Update using a PC Download update data using a PC and save on storage media* or a USB Mass Storage device.
After you’ve disabled or disconnected all other drives, the SSD should be recognized by installer.
Now all that you have to do is to delete all partitions on your SSD and Windows 10 should install without any problems.
If you were using an SD card to install the new version of Windows on your PC or laptop, you may have encountered this error which appears even after you have inserted the SD card into your computer and it gets the process stuck in a loop which needs to be terminated by exiting the setup process.
However, you can use an USB adapter in order to connect your SD card via an USB port on your computer and users have suggested that they have solved their issue by applying this particular method. Users have also reported that the external storage device you are using as a backup or as a storage device for Windows 10 must be a USB storage device and it needs to be connected to a USB port on your computer.
Updating BIOS can help you deal with certain issues regarding Windows Setup and users have reported that updating BIOS enabled them to follow through without seeing this particular error message.
# JP(shop) Dest=83; Compatible System Software Version=4.7600-; Dest=83; Image Version=00010015; System Software Version=4.7600; CDN=According to users, in order to fix this issue you’ll have to disconnect all other hard drives and leave only your SSD drive connected.Alternatively, you can try disabling all other hard drives except for your SSD from BIOS.This particular error usually appears when users are trying to reinstall their copy of Windows if they are using an external storage device to install Windows 10 to.The error message says “Please insert the external storage media and press OK” and it won’t appear even after users connect their external storage device.